Do I need a voltage converter or just an adaptor?
25.10.2026
You only need an adaptor if the INPUT line on your device’s label covers the voltage at your destination. A label reading “INPUT 100–240V” covers almost any supply. If it shows one voltage that doesn’t match the local supply, an adaptor won’t help: you need a voltage converter or a dual-voltage replacement, or you leave the device at home.
Last checked: 24 October 2026
What an adaptor does, and what a converter does
An adaptor changes the shape of your plug so it fits a foreign socket. The electricity passes straight through it at the local voltage and frequency. Travel Blue’s product pages say this plainly. The World Travel Adaptor with USB-C & USB-A Ports “does not convert voltage or frequency”, and the Earthed Worldwide Adaptor “does not convert voltage”.
A voltage converter, or transformer, changes the voltage itself. Electrical Safety First, the UK electrical safety charity, says that in countries where the voltage is 100 to 127 volts, “a voltage transformer or converter allows your appliance to work safely and properly”. If your appliance or its power supply is dual voltage rated, it says, you won’t need one.
Read the label first
Every charger and mains appliance has a rating plate, usually on the plug, the power brick or the base. Look for the word INPUT, then compare it with the supply where you’re going.
| What the label says | In a 230 V country, such as the UK, Spain or Australia | In a 120 V country, such as the USA or Canada | In Japan (100 V) |
|---|---|---|---|
| INPUT 100–240V ~ 50/60Hz | Adaptor only | Adaptor only | Adaptor only |
| INPUT 220–240V ~ 50Hz | Adaptor only | Adaptor and converter | Adaptor and converter |
| INPUT 110–120V ~ 60Hz | Adaptor and converter | Adaptor only | 100 V is below the range on the label, so ask the manufacturer |
Mexico runs at 120 V or 127 V. Treat it like the middle column, but if a single-voltage label stops at 120 V, check with the manufacturer before using it on a 127 V supply. Our guide to travel adaptors explained has the voltage for each country with a Travel Blue plug guide, and the Adaptor Finder shows which sockets you’ll find.
Some appliances have a small voltage switch instead of a wide input range. Set it to the local voltage before you plug in.
When a converter is the right answer
A converter makes sense for a single-voltage appliance you can’t do without, such as a 230 V hair dryer on a trip to the USA. Before you buy one, check two things.
First, the power rating. Electrical Safety First says every converter and transformer has a maximum power rating, in amps or watts, and that your appliance mustn’t exceed it. A hair dryer can draw far more than a phone charger, so read the wattage on its label and pick a converter rated above it.
Second, the type of appliance. Electrical Safety First warns that some electronic appliances, such as game consoles, TVs and computers, “aren’t suitable for use with converters”. If you’re not sure about yours, ask the manufacturer before you travel.
Often the simpler fix is to leave the appliance at home, use one your hotel provides, or buy a dual-voltage version.
Frequency is the other number
The label also shows a frequency in hertz (Hz). The UK and most of Europe run at 50 Hz. The USA and Canada run at 60 Hz, and Japan uses 50 Hz in the east and 60 Hz in the west, according to the Japan National Tourism Organization.
A label reading “50/60Hz” covers both. If yours shows only one, Electrical Safety First says the appliance “may work but not properly”, giving the example of a 50 Hz clock that runs fast on a 60 Hz supply. An adaptor doesn’t change the frequency.
Chargers that need only an adaptor
Phone and laptop chargers are the devices you’re most likely to pack, so check their labels before anything else. If they read 100–240V, the only question left is the plug shape.
An adaptor with USB ports can save you packing some chargers at all. The World to Europe Adaptor & USB Charger lists its USB power supply input as 100 to 240 V at 50 to 60 Hz, with a 5 V, 2.4 A output. It’s for Europe only, excluding Switzerland, Italy, Denmark and the UK, and it doesn’t convert voltage for anything plugged into its main socket.
Whatever goes into an adaptor’s main socket still gets the local supply, so the label check applies to it too.
A quick check before you pack
- Find the INPUT line on every charger and appliance you’re taking.
- Look up your destination’s voltage and socket types.
- Pack an adaptor for each device whose label covers the local voltage.
- For anything else, decide between a converter rated above its wattage, a dual-voltage replacement, or leaving it at home.
If a device buzzes, smells hot or gets hot on the local supply, unplug it and read the label again.
Sources
All checked on 24 October 2026.
- Electrical Safety First, “When travelling”: converters and transformers in 100 to 127 V countries, dual voltage rated appliances, electronics not suitable for converters, the rating plate, frequency and the 50 Hz clock example
- Electrical Safety First, “Travel adaptor for USA”: 120 V and 60 Hz in the USA; converters have a maximum power rating that the appliance must not exceed
- Electrical Safety First, “Travel adaptor for Canada”: 120 V and 60 Hz in Canada
- Japan National Tourism Organization, “Plug and electricity”: 100 V across Japan, 50 Hz in the east and 60 Hz in the west
- Travel adaptors explained, Travel Blue: voltage and frequency by country, including Mexico
- Travel Blue product pages, as linked above: adaptors do not convert voltage; USB input and output; countries covered